Ricoh CX3 - Focus Bracketing (FOCUS-BKT): Varying Focus Distance over a Series of Photographs; Settings

75
5
Shooting Menu
Contrast, Sharpness and Vividness During Color Bracket Shooting -----
During color bracket shooting, the contrast, sharpness, and vividness values set
in [Image Settings] are applied. However, the values for [Standard] in [Image
Settings] are applied when [Image Settings] is set to [Black & White] or [Sepia].
Focus Bracketing (FOCUS-BKT)
Choose this option to automatically vary focus by a selected amount
over a series of five photographs.
1
Select [FOCUS-BKT] and press the ADJ./OK button F.
2
Press the ADJ./OK button NF to choose the focus interval
and then press the ADJ./OK button twice.
• The symbol appears on the screen.
3
Half-press the shutter release button.
• The camera focuses according to the [Focus] setting.
4
Press the shutter release button
all the way down.
• The camera takes five consecutive
pictures based on the focus position
in Step 3.
Recording
RecordingRecording
Recording
FAR
FAR
NEAR
NEAR
Note -------------------------------------------------------------------------------------
• When [Focus] is set to [MF], the first picture is taken at the set focus position
without being measured.
• [White Balance] functions according to the [Auto] setting even if it is set to
[Multi-P AUTO].
• Photographs are taken and recorded in the following order:
Focus position Fore
➝
Center
(
*
)
➝
Back
Shooting order 23145
Recording order 12345
(
*
)
Focus set using the option currently selected for [Focus]. (GP.67)