89
6
Playback Menu
Protect
[Protect] allows you to protect files from
being accidentally deleted.
If [1 File] is selected, you can protect or
unprotect the file selected by pressing the
ADJ./OK button NF.
If [Select All] or [Cancel All] is selected,
you can protect or unprotect all files.
Selecting Multiple Files
Select [Sel Mult] to change the protect status of multiple individual
files or of all files in a selected range.
To select multiple individual frames:
1
Select [Sel. Indiv.] and press the ADJ./OK button.
2
Select a frame and press the ADJ./OK button.
• Press the MENU button to switch to the display for specifying a
range of files.
• If you selected a file by mistake, you can deselect it by selecting the
file and pressing the ADJ./OK button.
• Select all files you want to protect.
3
Press the Fn button.
To select two frames and all frames between them:
1
Select [Sel. Range] and press the ADJ./OK button.
2
Select the first frame and press the ADJ./OK button.
• Press the MENU button to switch to the display for specifying files
separately.
• If you make a mistake when selecting the starting point for the range
of files, press the DISP. button to return to the screen for selecting
the starting point.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
