Auto Adjustment
Sets whether to optimize image display for each VGA input.
Overscan
Changes the display area of the image. When this function is enabled, 96% of the original size of
the image will be displayed, and the rest of the areas surrounding the image will be cut off.
• On
Enables the Overscan function for Video timing.
• Off
Disables the Overscan function.
The Overscan function will become unavailable (grayed out) when:
• The Touch Feature function in the Screen menu is turned on, or
• The PAP function in the Screen menu is turned on.
OSD Info Box
When turned On, switching signal inputs, or changing timing, the display will show the current
input source and resolution on-screen. Select Off to show the information box on-screen only when
you press [INFO] on the remote control.
Adaptive Contrast
Turns the Adaptive Contrast function on or off. This feature enhances image contrast for dark
scenes.
DisplayPort
Set to DP1.1 when connecting a DisplayPort standard version 1.1 device to the DisplayPort Input
jack. When connecting a DisplayPort standard version 1.2 device, select DP1.2.
Information
Displays the following information of your machine.
• Model Name
• Operation Time
• Software Version
All Reset
Returns all settings to factory default values.
Setting Menu
35
To Next Page
Loading...
