Registering Administrators Before Using the Machine | User Guide | IM 7000, IM 8000, IM 9000
https://support.ricoh.com/services/device/ccmanual/IM_7000-8000-9000-re/en-GB/security/int/administrator.htm
When settings are complete, the machine logs you out automatically.
For the characters that can be used for login user names and passwords, see the section below:
Usable Characters for User Names and Passwords
Press [OK] twice.
Press [Close].
Press [OK].
Only the supervisor has the privilege to change the password of the administrator. If an administrator
forgets the password or wants to change the password, the supervisor must reset the password.
Refer to the provided guide for the default Login User Name and Login Password of the supervisor.
Do not forget the Login User Name and Login Password of the supervisor. If you forget these, you
have to restore the factory default settings, which will result in loss of data.
Logging in to the Machine as the Administrator
Log in to the machine as the supervisor on the control panel.
On the Home screen, press [Settings].
On the Settings screen, press [System Settings].
Changing the Password of an Administrator
To Next Page
Loading...
