Ricoh IM 8000

2023/05/01 14:17
Logging in to Web Image Monitor | User Guide | IM 7000, IM 8000, IM 9000
https://support.ricoh.com/services/device/ccmanual/IM_7000-8000-9000-re/en-GB/intro/int/loginwim.htm
1/3
User GuideIM 7000/8000/9000
Top Page>Introduction and Basic Operations>Logging in to Web Image Monitor
Logging in to Web Image Monitor
Access the management screen of the machine from the Web browser of the computer using the same
authentication information as that used when logging in from the control panel.
You can change the login password in Web Image Monitor. Using the tool, not only can you monitor the machine
status, but also manage the files stored in the machine.
Using Web Image Monitor
Launch the Web browser.
Enter "http://(IP address of the machine or host name)/" on the address
bar of the Web browser, and then press the Enter key.
Click [Login].
Enter the login user name and password, and then click [Login].
Logging in to the Web Image Monitor from the Computer