Ricoh IM C3010A - Using the Copy Function

Specifications for Paper
297
9
• An image may not be printed clearly on a sheet whose thickness is uneven. Print a
few sheets and check the result.
• The printing result may not be adequate or the envelope may become wrinkled
when the temperature or humidity is high.
• The printing result may not be adequate or output envelopes may become wrinkled
depending on the printing environment even when using the recommended
envelopes.
• When printing onto paper other than an envelope after printing onto several
envelopes, you may have to wait about one minute until printing starts to allow the
machine to make adjustments.
Using the Copy Function
Orientation of
Envelopes
Exposure Glass
Tray 2-4
Bypass Tray
Side-opening
envelopes
Flaps: open
Side to be scanned:
face down
Bottom side of
envelopes: toward
the left of the
machine
Flaps: open
Side to be printed:
face up
Bottom side of
envelopes: toward
the right of the
machine
Flaps: open
Side to be printed:
face down
Bottom side of
envelopes: toward
the left of the
machine
Side-opening
envelopes
Flaps: closed
Side to be scanned:
face down
Bottom side of
envelopes: toward
the back of the
machine
Flaps: closed
Side to be printed:
face up
Bottom side of
envelopes: toward
the back of the
machine
Flaps: closed
Side to be printed:
face down
Bottom side of
envelopes: toward
the back of the
machine
When loading envelopes, specify the envelope size and thickness.