12. [Back]
Press to return to the previous screen.
13. Date/Time and Toner remaining
The current date and time is displayed.
To display the information about Toner remaining, specify [Display Time/Remaining
Toner] of [System Bar Settings] to [Remaining Toner].
See "Display/Input", User Guide (HTML).
14. [Check Status]
Press to check the following system statuses of the machine. This lights up in red
when an error occurs.
• Machine's status
Indicates the error status and network status.
• Operational status of each function
Status of functions such as Copy or Scanner
• Current jobs
• Job history
• Machine's maintenance information
See "Checking the Machine Status from the Control Panel", User Guide (HTML).
15. Icon display area
Displays the icons and widgets.
• You can change the screen displayed when the power is turned on under [Function
Priority (Default Displayed Application)].
See "Displaying Frequently Used Functions on the First Screen", User Guide (HTML).
• When you press [Menu] ( ) [Reset Home Screen] with the Embedded Software
Architecture application being installed in the machine, the application icons are not
deleted.
Intuitive Screen Operation Using Fingertips
On the Home screen or application screen, you can perform the following operations by
touching the screen with your fingertips.
Flick (for switching between screens)
Touch and slide your finger on the screen quickly left or right to switch between the
screens.
To Next Page
Loading...
