To Next PageTo Next PageWhy is the screen of Ricoh IM C530FB not lit?
If the screen of the control panel on your Ricoh All in One Printer is not lit, the machine might be in sleep mode. Touch the screen to wake it up.
What to do if a system error occurred on Ricoh IM C530FB All in One Printer?
Power off your Ricoh All in One Printer, then power it on again. If the problem persists, consult your service representative.
What to do if Ricoh IM C530FB All in One Printer says a cover is open?
Ensure that all covers of the machine and options are closed on your Ricoh All in One Printer.
Why does Ricoh IM C530FB reset frequently?
If your Ricoh All in One Printer frequently resets or shuts down, power it off, check that the power cord is correctly plugged into both the machine and the outlet, and then power the machine back on.
What to do if original has jammed in Ricoh IM C530FB?
If an original has jammed in your Ricoh All in One Printer, see the animated illustration displayed on the control panel and remove the jammed original.
What to do if Ricoh IM C530FB says paper has run out?
If your Ricoh All in One Printer indicates that paper has run out, load paper into the paper tray.
Why Ricoh IM C530FB All in One Printer power does not come on?
If your Ricoh All in One Printer is not powering on, ensure the power cable is securely plugged into the wall outlet.
How to replace toner in Ricoh All in One Printer?
If the toner in your Ricoh All in One Printer is running low or has run out, prepare a replacement toner cartridge. Replace the toner when it is empty. If the message appears when there is still a lot of toner, remove the print cartridge following the toner replacement procedure displayed on the screen, and then re-install it.
General| Brand | Ricoh |
|---|---|
| Model | IM C530FB |
| Category | All in One Printer |
| Language | English |
Covers turning the machine on/off, energy saving modes, and identifying machine parts.
Explains touch panel, LED indicators, home screen navigation, and screen gestures.
Methods for logging into the machine via username, IC card, mobile device, or user code.
Step-by-step guide to making copies, including color modes and quantity.
Step-by-step guide for sending faxes, including scan settings.
Guide to installing drivers using Device Software Manager from CD or download.
Steps to install drivers for network printing on Windows and macOS.
General steps for printing documents on Windows and macOS.
How to scan documents and send them as email attachments.
How to scan and send documents to shared computer folders.
Procedures for replacing toner, waste toner bottle, and drum unit.
Troubleshooting when the machine is unresponsive or does not respond correctly.
