CIP Training L5160/L5130
Throughput
Replacing a Flushing Cartridge
Replace the flushing cartridge when the following messages appear on the display
panel:
"The flushing cartridge is depleted. Replace the flushing cartridge."
"The flushing cartridge has expired. Check for the appropriate flushing cartridge."
When the following message appears on the display panel, the flushing cartridge
should be replaced soon. Prepare a new flushing cartridge.
"The flushing cartridge has almost finished. Prepare a flushing cartridge.
1. Open the right cover.
DWT183
2. Pull out the used flushing cartridge.
DWT198
3. Take the new flushing cartridge out of the box.
Put the used flushing cartridge in the supplied plastic bag.
4. Fully insert the new flushing cartridge into the holder until
it stops. Align the tabs on the flushing cartridge with the
indents on the holder.