CIP Training L5160/L5130
Throughput
DWT199
5. Raise the lock lever located inside of the right cover on the left, and then close the right cover.
• When printing is interrupted, the confirmation screen will be displayed
after replacing the cartridge. Press [Resume] to restart printing. However,
the quality of the print cannot be guaranteed.
Replacing a Waste Ink Bottle
Replace the waste ink bottle when the following message appears on the display panel:
"The waste ink bottle is full. Replace the waste ink bottle and reset the waste ink level."
When the following message appears on the display panel, the waste ink bottle should be replaced
soon. Prepare a new waste ink bottle.
"The waste ink bottle is nearly full. Prepare a waste ink bottle."
• Do not replace the waste ink bottle while the machine is printing or during maintenance.
• Before replacing the waste ink bottle, spread paper around the area to keep ink from dirtying
your workspace.
• If the paper towel spread under the waste ink bottle is stained, replace it with a new supplied
paper towel.
1. Check the capacity of the waste ink bottle.
When the amount of waste ink reaches the full bottle marker, replace the waste ink bottle.
DWT201
To Next Page
Loading...
