CAQ003
Open the paper roll
tray, and then slowly
pull up the edge of
the jammed paper.
Cut the edge of the paper roll by sliding
the cutter knob right to left, or left to
right ( ), and then remove the offcut ( ).
Be sure to return the cutter knob
to the right or left end of the cutter
area.
Rotate the paper roll
30 degrees forward.
As a cutoff from the paper
roll might have remained,
the paper roll must be
rotated 30 degrees forward.
If you cannot remove
the jammed paper,
rotate the paper roll
in the direction of the
arrow until the edge
emerges.
Cut the edge of the
paper using the
cutter or scissors.
Rotate the paper
roll until the edge
of the paper is fed
into the rubber part
of the roller.
Make sure the paper
is not loose, and
insert it straight into
the roller.
Rotate the paper
feed knob in the
direction of the
arrow until the edge
of the paper roll
emerges.
Cut the edge of the paper roll by sliding
the cutter knob right to left, or left to right
to ( ), and then remove the offcut ( ).
Be sure to return the cutter knob to the
right or left end of the cutter area.
Rotate the paper roll
30 degrees forward.
As a cutoff from the paper
roll might have remained,
the paper roll must be
rotated 30 degrees forward.
Close the paper roll tray.
5. Clearing Misfeeds
To Next Page
Loading...
