Ricoh MD-P2 - Page 110

SP3-XXX (Process)
3901 [Auto Adjustment]
001 TD Setting Exe *EGB
Executes the automatic adjustment (process
control).
002 TD Setting Result *EGB
Displays the result of the automatic adjustment
for each color.
003 Detail Result K *EGB
Displays the result of the automatic adjustment
for black.
004 Detail Result M *EGB
Displays the result of the automatic adjustment
for magneta.
005 Detail Result C *EGB
Displays the result of the automatic adjustment
for cyan.
006 Detail Result Y *EGB
Displays the result of the automatic adjustment
for yellow.
SP5-XXX (Mode)
5001 [All Indicators On]
5001 001 *CTL Checks the LED on the operation panel.
5024 [mm/ inchDisplay]
5024 001 *CTL
Sets units (mm or inch) for custom paper sizes.
[0 or 1 / 1 /-]
0: mm (EU/AS), 1: inch (NA)
5045 [Accounting counter]
5045 001 Counter Method *CTL
Selects the counting method if the meter charge
mode is enabled with SP5-930-001.
[0 to 2 / 1 / -]
0: Developments, 1: Pages, 2:Coverage range
5. System Maintenance Reference
108
5