Ricoh MD-P2 - Page 126

5816 093
CERT: St ExpTime *CTL
Displays the start time of the period for which the current NRS certification is enabled.
5816 094
CERT: End ExpTime *CTL
Displays the end time of the period for which the current NRS certification is enabled.
5816 200
Poling Man Exc -
Executes the manual polling.
5816 201
Instl: Condition *CTL
Displays a number that indicates the status of the @Remote service device.
0: Neither the RCG device nor RCG-N device are set.
1: The RCG-N device is being set. Only Box registration is completed. In this status the
external RCG unit cannot answer a polling request.
2: The RCG-N device is set. In this status the external RCG unit cannot answer a polling
request.
3: The RCG device is being set. In this status the RCG-N device cannot be set.
4: The RCG module has not started.
5816 202
Instl: ID # *CTL
Allows entry of the number of the request needed for the RCG-N device.
5816 203
Instl: Reference *CTL
Executes the inquiry request to the @Remote GW URL.
5. System Maintenance Reference
124
5