Ricoh MD-P2 - Page 133

5828 244 Web Link2 visible *CTL Same as "-241"
5832
[HDD]
HDD Initialization
*CTL
Initializes the hard disk. Use this SP mode only if
there is a hard disk error.
001 HDD Formatting (ALL)
002 HDD Formatting (IMH)
003 HDD Formatting (Thumbnail)
004 HDD Formatting (Job Log)
005 HDD Formatting (Printer Fonts)
006 HDD Formatting (User Info)
007 Mail RX Data
008 Mail TX Data
009 HDD Formatting (Data for a Design)
010 HDD Formatting (Log)
011 HDD Formatting (Ridoc I/F)
5840 [IEEE 802.11]
5840 006 Channel MAX *CTL
Sets the maximum number of channels available
for data transmission via the wireless LAN. The
number of channels available varies according to
location. The default settings are set for the
maximum end of the range for each area. Adjust
the upper 4 bits to set the maximum number of
channels.
EU: [1 to 13 / 13 / 1/step]
NA/ AS: [1 to 11 / 11 / 1/step]
Main SP Tables: 1
131
5