Ricoh MD-P2 - Page 135

5804 042 Fragment Thresh *CTL
Adjusts the fragment threshold for the IEEE802.11
card.
[256 to 2346 / 2346 / 1]
This SP is displayed only when the IEEE802.11
card is installed.
5804 043 11g CTS to Self *CTL
Determines whether the CTS self function is turned
on or off.
[0 to 1 / 1 / 1] 0: Off, 1: On
This SP is displayed only when the IEEE802.11
card is installed.
5804 044 11g Slot Time *CTL
Selects the slot time for IEEE802.11.
[0 to 1 / 0 / 1] 0: 20 m, 1: 9 m
This SP is displayed only when the IEEE802.11
card is installed.
5804 045 WPA Debug Lvl *CTL
Selects the debug level for WPA authentication
application.
[1 to 3 / 3 / 1] 1: Info, 2: warning, 3: error
This SP is displayed only when the IEEE802.11
card is installed.
5842 [GWWS Analysis] Net File Application Analysis
5842 001 Setting 1 *CTL
Prints or does not print the module log for each
bit.
[0 or 1 / 1 / 1/step]
0: Prints, 1: Not print
Main SP Tables: 1
133
5