5844 006 PnP Serial Number
5844 100 Notify Unsupport
5845 [Delivery Srv] Delivery Server Setting
5845 003 DeliErr DisplTime *CTL
Specifies the retry interval.
[60 to 900 / 300 / 1 second/step]
5845 004 Delivery Options *CTL
Specifies the maximum number of retries.
[0 to 99 / 3 / 1/step]
5845 022 Instant Trans Off *CTL
Switches instant transmission off/on.
[0 or 1 / 1 / -]
1: Off. Instant transmission not possible with
network setting errors.
0: On. Instant transmission possible with network
setting errors.
• The machine will continue to transmit over the network, even if the network settings
are incorrect. (This causes multiple errors, of course.)
•
With this SP off, the machine will stop communicating with the network if the
settings are wrong. This reduces the amount of spurious network traffic caused by
errors due to incorrect settings.
5846 [UCS Setting]
5846 010
LDAP Search TOut *CTL [1 to 255 / 60 / 1 /step]
Sets the length of the timeout for the search of the LDAP server.
5846 041
AddtB Acl Info *CTL
This SP must be executed immediately after installation of an HDD unit in a basic
machine that previously had no HDD. The first time the machine is powered on with the
new HDD installed, the system automatically takes the address book from the NVRAM
and writes it onto the new HDD. However, the new address book on the HDD can be
accessed only by the system administrator at this stage. Executing this SP by the service
technician immediately after power on grants full address book access to all users.
Main SP Tables: 1
135
To Next Page
Loading...
