5888*
[Personal Information Protect]
Selects the protection level for logs.
[0 to 1 / 0 / 1}
0: No authentication, No protection for logs
1: No authentication, Protected logs (only an administrator can see the logs)
5893
[SDK Application Counter] *CTL -
Displays the counter name of each SDK application.
001 SDK-1
002 SDK-2
003 SDK-3
004 SDK-4
005 SDK-5
006 SDK-6
5901
[High Humi. Mode] High Humid
Paper Mode
*ENG -
001 0:OFF 1:ON
Turns on or off the high humid paper mode.
[0 or 1 / 0 / 1 /step]
0: OFF, 1: ON
002 1:MD1 2:MD2 3:MD3
Selects the mode for the high humid paper mode. This SP is activated only when the
SP5901-001 is "1: ON".
[1 to 3 / 1 / 1/step]
1: Mode 1 (Transfer current is increased to compensate for insufficient fusing.)
2: Mode 2 (Transfer current is increased and the machine executes the idle rotation for 30
seconds to compensate for small curl.)
3: Mode 3 (Transfer current is increased and the machine executes the idle rotation for 60
seconds to compensate for large curl.)
5. System Maintenance Reference
146
To Next Page
Loading...
