34
Module mismatch - Correct module is
not on the SD card)
SD update data is incorrect. Acquire the correct
data (Japan, Overseas, OEM, etc.) then install
again.
35
Module mismatch – Module on SD
card is not for this machine
SD update data is incorrect. The data on the SD
card is for another machine. Acquire correct update
data then install again.
36
Cannot write module – Cause other
than E34, E35
SD update data is incorrect. The data on the SD
card is for another machine. Acquire correct update
data then install again.
40 Engine module download failed
Replace the update data for the module on the SD
card and try again, or replace the EGB board.
42
Operation panel module download
failed
Replace the update data for the module on the SD
card and try again, or replace the LCDC.
43 Stamp data module download failed
Replace the update data for the module on the SD
card and try again, or replace the hard disks.
44 Controller module download failed
Replace the update data for the module on the SD
card and tray again, or replace controller board.
50 Electronic confirmation check failed
SD update data is incorrect. The data on the SD
card is for another machine. Acquire correct update
data then install again.
Firmware Update
181
To Next Page
Loading...
