016
Fusing Unit Set Error
• Fusing unit not set
•
Disconnected or defective harness of the fusing unit
1. Install the fusing unit.
2.
Check or replace the harness of the fusing unit
3. Replace the fusing unit.
070
Printing Error 1: No Paper
• No paper in the tray
Put paper in the tray.
071
Printing Error 2: Paper Size Error
• Paper size mismatch between selected paper size and detected paper size
Load correct size paper in the tray or select correct paper size.
072
Duplex Error: Job Data Delay
• Job data for the 2nd side is not sent to the machine for specified time while paper is fed
in the duplex path.
Send print job data again.
087
Life End: Yellow AIO
• Consumed toner exceeds in the toner end limit.
•
Collected toner exceeds in the waste toner limit.
Replace the yellow AIO
088 Waste Toner Bottle: Near Full
089 Waste Toner Bottle: Full
• Waste toner bottle near-full or full
Replace the waste toner bottle.
6. Troubleshooting
190
To Next Page
Loading...
