Separation Pad Approx. 200 k prints/ peace
Service Maintenance
To enable the machine for the maintenance by the service technician, the meter-charge mode must be set
to "1 (On)" with SP5930-001.
PM items serviced by the service technician are designated as user replaceable items and yield items.
The following table shows the expected yield values for PM items when replacing them by the service
technician with the meter-charge mode on.
Meter-charge Mode
On
Image Transfer Belt Unit 135 K
Maintenance Kit (Fusing Unit and Transfer
Roller Unit)
135 K
The replacement timing for the customer maintenance is set earlier than the target yield for the service
maintenance
in order to ensure that the parts of the machine are replaced before an image problem occurs.
2. Appendix: Preventive Maintenance
12
To Next Page
Loading...
