Ricoh MD-P2 - Page 250

1003 1
Initialize System
Initializes settings in the "System" menu of the user mode.
1003 3 Delete Program
1004 [Print Summary]
1004 1
Service Summary
Prints the service summary sheet (a summary of all the controller settings).
1005 [Display Version]
1005 1
Printer Version
Displays the version of the controller firmware.
1007
[Supply Display]
Enables or disables the display for information on each supply.
1007 001 Development *CTL
[0 or 1 / 0 / 1 /step]
0: OFF, 1: ON
1007 002 PCU *CTL
1007 003 Transfer *CTL
1007 004 Int. Transfer *CTL
1007 005 Transfer Roller *CTL
1007 006 Fuser *CTL
1007 007 Fuser Oil *CTL
1101
[ToneCtlSet] Toner Control Setting
Recalls a set of gamma settings. This can be either a) the factory setting, b) the previous
setting, or c) the current setting.
1101 1 Tone (Factory)
*CTL1101 2 Tone (Prev.)
1101 3 Tone (Current)
3. Appendix: SP Mode Tables
18
3