Ricoh MD-P2 - Engine SP2-xxx (Drum)

Engine SP2-xxx
SP2-XXX (Drum)
2101
[Color Regist.] Color Registration Correction
([Color], M: Main scan, S: Sub scan) DFU
You can adjust these SPs if the color registration is not good after the Line Position
Adjustment
(also known as ‘MUSIC’) is done. The [K] value (-001) is the standard value
in the main scan adjustment. The values other than [k] value are added to [K] value. So,
[K] value normally does not need to be adjusted in the main scan adjustment.
001 [K]: Main Reg. Dot *EGB
Adjusts the side edge registration by a dot for each
mode.
[-127 to 127 / 0 / 1 dot/step]
002 [M]: Main Reg. Dot *EGB
003 [C]: Main Reg. Dot *EGB
004 [Y]: Main Reg. Dot *EGB
013 [M]:Sub Reg. Line *EGB
[-127 to 127 / 0 / 1 line/step]014 [C]:Sub Reg. Line *EGB
015 [Y]:Sub Reg. Line *EGB
021 [K]:Sub Reg. Dot *EGB
[0 to 15 / 0 / 1 sub-dot/step]
022 [M]:Sub Reg. Dot *EGB
023 [C]:Sub Reg. Dot *EGB
024 [Y]:Sub Reg. Dot *EGB
2104
[Magnifi. Adj.] Magnification Adjustment
([Color], Main Scan Magnification) DFU
001 [K]:M Mag 0.001% *EGB
Adjusts the main scan magnification.
[-1200 to 1200 / 0 / 0.001% /step]
002 [M]:M Mag 0.001% *EGB
003 [C]:M Mag 0.001% *EGB
004 [Y]:M Mag 0.001% *EGB
Engine SP2-xxx
27
3