2120 [Auto Adjustment] Manual Line Position Adjustment Execution
001 LPos. Adj: Rough - Performs the line position rough adjustment.
002 LPos. Adj: Fine - Performs the line position fine adjustment.
003 LSpd LPos. Adj -
Performs the line position adjustment for the low
speed.
004 Adjustment -
Performs the process control and line position fine
adjustment.
005 ProCon 0:OFF 1:ON *EGB
Turns on or off the automatic process control
execution.
[0 or 1 / 0 / 1 /step]
0:OFF, 1:ON
006 MUSIC 0:OFF 1:ON *EGB
Turns on or off the automatic line position control
execution.
[0 or 1 / 0 / 1 /step]
0:OFF, 1:ON
007 Tnr Cnt 0:OFF 1:ON *EGB
Turns on or off the automatic toner control
execution.
[0 or 1 / 0 / 1 /step]
0:OFF, 1:ON
008 Color Regi. Adj *EGB
Performs the process control, line position rough
adjustment, line position fine adjustment and line
position adjustment for the low speed in order.
009 Transfer Belt Adj *EGB
Performs the process control, line position rough
adjustment, line position fine adjustment and line
position
adjustment for the low speed in order. The
standard margin position is measured when
executing the line position fine adjustment.
2152
[Area Shading] Area Shading Correction Setting
([Color], Area) DFU
Engine SP2-xxx
29
To Next Page
Loading...
