Ricoh MD-P2 - Engine SP5-xxx (Mode)

Engine SP5-xxx
SP5-XXX (Mode)
5001 [All Indicators On]
5001 001 *CTL Checks the LED on the operation panel.
5024 [mm/ inchDisplay]
5024 001 *CTL
Sets units (mm or inch) for custom paper sizes.
[0 or 1 / 1 /-]
0: mm (EU/AS), 1: inch (NA)
5045 [Accounting counter]
5045 001 Counter Method *CTL
Selects the counting method if the meter charge
mode is enabled with SP5-930-001.
[0 to 2 / 1 / -]
0: Developments, 1: Pages, 2:Coverage range
5051 [Refill Toner Disp] Toner Refill Display
5051 001 Refill Toner Disp *CTL
Enable or disable the warning display when you
install a toner bottle that was refilled by third party
venders.
[0 or 1 / 0 / -]
0: Enable, 1: Disable
5055 [Display IP address]
5055 001 Display IP address *CTL
Display or does not display the IP address on the
LCD.
[0 or 1 / 0 / -]
0: Not display, 1: Display
5056 [Coverage Counter]
Engine SP5-xxx
37
3