EasyManua.ls Logo

Ricoh MD-P2 - Page 271

Ricoh MD-P2
356 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5307 003 Rule Set(Start) -
NA: 04100010, EU: 035(4)00010,
ASIA: 105(4)00010
Specifies the start setting for the summer time mode.
1st and 2nd digits: The month. [1 to 12]
3rd digit: The week of the month. [1 to 5]
4th digit: The day of the week. [0 to 6 = Sunday to Saturday]
5th and 6th digits: The hour. [00 to 23]
7th digit: The length of the advanced time. [0 to 9 / 1 hour /step]
8th digit: The length of the advanced time. [0 to 5 / 10 minutes /step]
For example: 3500010 (EU default)
The timer is advanced by 1 hour at am 0:00 on the 5th Sunday in March
The digits are counted from the left.
Make sure that SP5-307-1 is set to "1".
5307 004 Rule Set(End) -
NA: 105(4)60000, EU: 105(4)00000,
ASIA: 03100000
Specifies the end setting for the summer time mode.
There are 8 digits in this SP.
1st and 2nd digits: The month. [1 to 12]
3rd digit: The week of the month. [0 to 5]
4th digit: The day of the week. [0 to 6 = Sunday to Saturday]
5th and 6th digits: The hour. [00 to 23]
The 7th and 8 digits must be set to "00".
The digits are counted from the left.
Make sure that SP5-307-1 is set to "1".
5401 [Access Control]
5401 104 Authentication Time
*CTL
[0 to 255 / 0 / 1 sec/step]
0: 60 seconds
Specifies the authentication time-out interval.
Engine SP5-xxx
39
3

Table of Contents

Related product manuals