Ricoh MD-P2 - Page 292

5832
[HDD]
HDD Initialization
*CTL
Initializes the hard disk. Use this SP mode only if
there is a hard disk error.
001 HDD Formatting (ALL)
003 Format Thumbnail
004 Format Job Log
005 Format Font
006 Format User Info
007 Format Rec Mail
008 Format Sed Mail
009 Format DFU data
010 Formatting All Log
011 Format Ridoc I/F
5840 [IEEE 802.11]
5840 006 Channel MAX *CTL
Sets the maximum number of channels available for
data
transmission via the wireless LAN. The number
of channels available varies according to location.
The default settings are set for the maximum end of
the range for each area. Adjust the upper 4 bits to
set the maximum number of channels.
EU: [1 to 13 / 13 / 1/step]
NA/ AS: [1 to 11 / 11 / 1/step]
5840 007 Channel MIN *CTL
Sets the minimum number of channels available for
data
transmission via the wireless LAN. The number
of channels available varies according to location.
The default settings are set for the minimum end of
the range for each area. Adjust the lower 4 bits to
set the minimum number of channels.
EU: [1 to 13 / 1 / 1/step]
NA/ AS: [1 to 11 / 1 / 1/step]
3. Appendix: SP Mode Tables
60
3