Ricoh MD-P2 - Page 305

5860 026
S/MIVE: MIME Header
Setting
*CTL
Selects the MIME header type of an E-mail sent by
S/MIME.
[0 to 2 / 0 / 1]
0: Microsoft Outlook Express standard
1: Internet Draft standard
2: RFC standard
5866 [E-Mail Report]
5866 001 Report Validity *CTL
Disables and re-enables the email notification
feature.
[0 or 1/ 0 / 1/step]
0: Enable, 1: Disable
5866 005 Add DataFiled *CTL
Enables or disables to add the date field on the alert
notice e-mail.
[0 or 1 / 0 / 1/step]
0: Off, 1: On
5869 [RAM Disk Setting]
5869 001 Mail Function *CTL#
Enables or disables the e-mail transfer function. This
SP sets the RAM disk size for the e-mail transfer
function.
[0 or 1 / 0 / 1/step]
0: On, 1: Off
5870 [Common Key Info Writi] Common Key Information Writing
5870 001 Writing *CTL
Writes the authentication data (used for NRS) in the
memory.
5870 003 Initialize *CTL Initializes the authentication data in the memory.
5873 [SD Card Appli Move]
5873 001 Move Exec See ‘SD Card Appli Move’.
5873 002 Undo Exec See ‘SD Card Appli Move’.
Engine SP5-xxx
73
3