001 0:OFF 1:ON
Turns on or off the high humid paper mode.
[0 or 1 / 0 / 1 /step]
0: OFF, 1: ON
002 1:MD1 2:MD2 3:MD3
Selects the mode for the high humid paper mode. This SP is activated only when the
SP5901-001 is "1: ON".
[1 to 3 / 1 / 1/step]
1: Mode 1 (Transfer current is increased to compensate for insufficient fusing.)
2: Mode 2 (Transfer current is increased and the machine executes the idle rotation for 30
seconds to compensate for small curl.)
3: Mode 3 (Transfer current is increased and the machine executes the idle rotation for 60
seconds to compensate for large curl.)
5902 [Mono Pri. Mode] *ENG -
001 0:OFF 1:ON
Turns on or off the monochrome printing priority mode. This SP can reduce color toner in the
BW printing mode if this SP is set to "1: ON".
0: OFF (default), 1: ON
5903 [Service Setting] DFU *ENG -
001 Special Ctl Mode
002 EndCtl 0:OFF 1:ON
5907 [Plug/ Play] Plug/Play Name Selection
5907 001 *CTL [0 to 8 / 0 / 1/step]
5930 [Meter Click Ch.] Meter Click Charge
Engine SP5-xxx
75
To Next Page
Loading...
