Ricoh MD-P2 - Page 310

001 Latest *CTL
Displays the SC991 detected.
The 10 most recently detected SC.
002 Latest 1 *CTL
003 Latest 2 *CTL
004 Latest 3 *CTL
005 Latest 4 *CTL
006 Latest 5 *CTL
007 Latest 6 *CTL
008 Latest 7 *CTL
009 Latest 8 *CTL
010 Latest 9 *CTL
7502 [Counter-Paper Jam]
7502 001 Counter-Paper Jam *CTL
Displays the total number of jams detected.
[0 to 9999 / 0 / 1 sheet/step]
7504
[Paper Jam/Loc] Paper Jam Location
Displays the number of jams according to the location where jams were detected.
001 At Power On *CTL Paper is not fed at power on.
017 PFU: Relay On *CTL
Paper does not reach the relay sensor of the PFU
(option).
019 Regist On: Bypass *CTL
Paper from the by-pass tray stays on the registration
sensor.
020 Regist On: T1 *CTL
Paper from the tray1 stays on the registration
sensor.
022 Regist On: PFU *CTL
Paper from the PFU (option) stays on the registration
sensor.
023 Regist On:Duplex *CTL
Paper from the duplex path stays on the registration
sensor.
024 Regist Off *CTL Paper does not reach the registration sensor.
3. Appendix: SP Mode Tables
78
3