EasyManua.ls Logo

Ricoh MD-P2 - Page 333

Ricoh MD-P2
356 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
012 Tray 11 *CTL (Not used)
013 Tray 12 *CTL (Not used)
014 Tray 13 *CTL (Not used)
015 Tray 14 *CTL (Not used)
016 Tray 15 *CTL (Not used)
8461 [T: PrtPGS/Ppr Type] *CTL
Print pages/ Paper type
8464 [P: PrtPGS/Ppr Type] *CTL
The number of sheets of specific paper types
[0 to 9999999/ 0 / 1]
001 Normal 005 Normal (Back)
002 Recycled 006 Thick (Back)
003 Special 007 OHP
004 Thick 008 Other
These counters increase when the paper is output. On the other hand, the PM counter increases (to
measure the service life of each feed roller) when the paper is fed.
Blank sheets (covers, chapter covers, slip sheets) are also counted.
During duplex printing, a sheet printed on two sides and a sheet printed on one side are both counted
as 1.
8471
[PrtPGS/Mag] *CTL Print pages/ Magnification
The number of pages magnified or reduced
[0 to 9999999/ 0 / 1]
8471 001 to 49% 8471 004 101% to 200%
8471 002 50% to 99% 8471 005 201% to
8471 003 100%
Some application programs (on the computer) can specify the magnification setting of the printer
driver (e.g., MS Excel). In a case like this, SP8-471 recognizes the setting and increases the
corresponding
counter. Other application programs can magnify or reduce the print images on their
Engine SP8-xxx
101
3

Table of Contents

Related product manuals