5. Lift up the hook of the harness guide [B] at the rear-left frame and slide the harness guide to the
right.
6. Remove the springs [C] (left side and right side).
7.
Stoppers [D] (
x 2 each; left side and right side)
8. Remove the laser optics housing unit [E] from the top cover and place it on the main body.
• Always use two hands when carrying the laser optics housing unit. Be sure not to drop the
laser optics housing unit.
•
When removing the laser optics housing unit, the circle area [F] might be stuck in the frame or
other pars. Remove the laser optics housing unit carefully.
4. Replacement and Adjustment
34
To Next Page
Loading...
