004 Bit Switch 4 DFU 0 1
1001 Bit Switch
005 Bit Switch 5 0 1
bit 0 DFU - -
bit 1 Multiple copies if a paper size or type mismatch
occurs
0: Disable
(Single
copy)
1: Enable
(Multiple copy)
If a paper size or type mismatch occurs during the printing of multiple copies, only a
single copy is output by default. Using this BitSw, the device can be configured to
print all copies even if a paper mismatch occurs.
bit 2 DFU - -
bit 3 [PS] PS Criteria Pattern3 Pattern1
Change the number of PS criterion used by the PS interpreter to determine whether a
job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
bit 4 Increase max number of the stored jobs to 1000
jobs.
Disable
(100)
Enable (1000)
Enable: Changes the maximum number of jobs that can be stored on the HDD via
Job Type settings to 1000. The default is 100.
bit 5 Face-up output Disable Enable
Enable: All print jobs will be output face-up in the destination tray.
bit 6 Method for determining the image rotation for the
edge to bind on.
0: Disable 1: Enable
If enabled, the image rotation will be performed as they were in the specifications of
older models for the binding of pages of mixed orientation jobs.
The old models are below:
- PCL: Pre-04A models
- PS/PDF/RPCS:Pre-05S models
5. System Maintenance Reference
96
To Next Page
Loading...
