6. Click [OK].
7. "Updating..." appears. Wait for about one or two minutes, and then click [OK].
If nothing appears on the screen after you click [OK], wait for a while, and then
refresh the web browser screen.
8. Log out of the machine, and then exit the Web browser.
When you changed Active/Inactive of Log Collect, delete all logs.
Deleting All Logs
To display a message on the control panel and send an e-mail to the administrator when
the job log storage area is almost full, enable [System Settings] [Settings for
Administrator] [Data Management] [Job Execution Restrictions When Log Limit is
Reached]. When the setting is enabled, execution of a new job is prevented to protect
the existing logs.
Operating the Machine Giving Priority to Job Log Maintenance
Job Log Item Log Type Attribute Content
Copier: Copying Copier: Copying Details of normal and Sample Copy jobs.
Copier: Copying and
Storing
Copier: Copying and
Storing
Details of files stored in the Document Server that
were also copied at the time of storage.
Document Server:
Storing
Document Server:
Storing
Details of files stored using the Document Server
screen.
Document Server:
Stored File
Downloading
Document Server:
Stored File
Downloading
Details of files stored in the Document Server and
downloaded using Web Image Monitor.
Stored File Printing Stored File Printing Details of files printed using the Document Server
screen.
Scanner: Sending Scanner: Sending Details of sent scan files.
Scanner: Sending and
Storing
Scanner: Sending and
Storing
Details of scan files stored in the Document Server
that were also sent at the time of storage.
Section Top
Job Log Information Items
To Next Page
Loading...
