Top Page > Introduction and Basic Operations > Basic Operation of the Machine >
Names and Functions of the Control Panel
1. Media slots
Insert an USB flash memory device. You can store the scanned data or print the file
stored on the media.
Use the media formatted in FAT16 or FAT32.
Certain types of USB flash memory devices cannot be used in the machine.
A USB extension cable, hub, or card reader cannot be used.
If the power of the machine is turned off or the media is removed from the machine
while the machine is reading the data in the media, check the data in the media.
The touch panel (Smart Operation Panel) that displays the operation screen of the machine is
referred to as the "Control Panel".
On both sides of the control panel, interfaces for connecting external devices and slots to
insert an USB flash memory device are provided.
Even when the screen is turned off, the LED indicators on the frame of the control panel show
the status of the machine.
To Next Page
Loading...
