You can search user information stored in the LDAP Server. Use it for the following purposes:
When you send files by e-mail under the Scanner or Fax function, you can search the
Address Book stored in the server and specify the e-mail address.
Log in the machine using the authentication information registered in the server.
A user logged into the LDAP server for the first time is automatically stored in the Address
Book.
Managing the User Information Registered Automatically
1. Log in to the machine as the machine administrator on the control panel.
Logging in to the Machine as an Administrator
When custom-privileges administrators are registered, you can log in to the machine as a
custom-privileges administrator with the Authentication/Charge privilege as well.
Logging in to the Machine as a Custom-Privileges Administrator
2. On the Home screen, press [Settings].
3. Press [System Settings].
4. Press [Settings for Administrator] [Authentication/Charge] [Administrator
Authentication/User Authentication/App Auth.] [Register/Change/Delete LDAP
Server].
5. Select a Not Registered item, and then press [Register/Change].
To Next Page
Loading...
