1. Log in to the machine as the machine administrator on the control panel.
Logging in to the Machine as an Administrator
When custom-privileges administrators are registered, you can log in to the
machine as a custom-privileges administrator with the Data Management privilege
as well.
Logging in to the Machine as a Custom-Privileges Administrator
2. On the Home screen, press [Settings].
3. Press [System Settings].
4. Press [Settings for Administrator] [Data Management] [Delete All Logs].
5. When the confirmation dialog is displayed, press [Yes].
6. When the confirmation dialog is displayed, press [Exit].
7. Press [Home] ( ), and then log out of the machine.
To Next Page
Loading...
