Ricoh Metis MF4 - Operating the Machine Giving Priority to Job Log Maintenance

1. Log in to the machine as the machine administrator on the control panel.
Logging in to the Machine as an Administrator
When custom-privileges administrators are registered, you can log in to the
machine as a custom-privileges administrator with the Data Management privilege
as well.
Logging in to the Machine as a Custom-Privileges Administrator
2. On the Home screen, press [Settings].
3. Press [System Settings].
4. Press [Settings for Administrator] [Data Management] [Job Execution
Restrictions When Log Limit is Reached].
5. From the list next to Job Execution Restrictions When Log Limit is Reached
select [On].
6. Press [OK].
7. Press [Home] ( ), and then log out of the machine.
Specifying the setting using Web Image Monitor