Ricoh Metis MF4 - For Basic Authentication

1. Enter the Login User Name.
2. Enter the password in [Login Password], and then re-enter the password in
[Confirm Login Password] for confirmation.
3. Press [OK].
For LDAP Authentication
1. Press [LDAP Authentication Info].
2. Select [Specify Other Authentication Information] in "LDAP Authentication Info", and
then enter the Login User Name and Login Password to access the LDAP Server.
Re-enter the password in [Confirm Login Password].
Ask the administrator of the LDAP server for the Login user name and Login
password.
When you select an item other than [Specify Other Authentication Information] in
"LDAP Authentication Info", the login user name and login password specified in
[Register/Change/Delete LDAP Server] are enabled.
[System Settings] [Settings for Administrator] [Authentication/Charge]
[Administrator Authentication/User Authentication/App Auth.]
3. Press [OK].
5. Press [OK].
6. After completing the procedure, press [Home] ( ).
7. When a message prompting you to back up the address book appears on the screen,
press [Go to Backup] to back up the address book.