If the message persists even after you have performed the operations as instructed in the
following message, a malfunction may temporarily occur on the machine. Turn off the power
of the machine, wait for 10 seconds or more after confirming that the main power indicator is
turned off, and then turn on the power.
"Cover Open"
"Add Toner" / "Add Staples"
"Waste Toner Bottle is full." / "Hole Punch Receptacle is full."
"Original(s) left on exposure glass."
"No paper."
Turning On and Off the Power
When Messages Appear | When a Message Appears While Using the Copy Function
Page Top
To Next Page
Loading...
