7
ENERGY STAR Program
•Low Power mode
This machine automatically lowers its power consumption 1 minute after fin-
ishing the last copy or print job. Fax reception and printing is still possible in
Low Power mode, but to make copies, you have to press the operation switch
first.
• Off mode (Copier only)
To conserve energy, this machine automatically turns off 1 minute after fin-
ishing the last copy or print job. In this manual, the Off mode is called the
Auto Off mode.
• Sleep mode (Fax, printer, or scanner installed)
If there is a fax, printer, or scanner unit installed, this machine automatically
lowers its power consumption even further 1 minute after finishing the last
copy or print job. Fax reception and printing is still possible in Sleep mode,
but to make copies, you have to press the operation switch first.
Note
❒ If you want to operate this machine while it is in either of these modes, do
one of the following:
• Turn on the operation switch.
• Place originals in the ARDF.
Reference
“Timer Settings”, General Settings Guide
ENERGY STAR
®
Program
The ENERGY STAR
®
Program encourages energy conservation by promoting energy efficient
computers and other office equipment.
The program backs the development and dissemination of products that feature energy saving
functions.
It is an open program in which manufacturers participate voluntarily.
Targeted products are computers, monitors, printers, facsimiles, copiers, scanners, and multi-
function devices. Energy Star standards and logos are internationally uniform.
StellaC3_Intro_F-AE_FM_forPaper.book Page 7 Friday, August 25, 2006 1:43 PM
To Next Page
Loading...
Need help?
General
