Ricoh MP 161F - Specifications for the Main Unit

Specifications for the Main Unit
47
3
Specifications for the Main Unit
Following describes the specification of the main unit.
❖ Configuration:
Desktop
❖ Photosensitivity type:
OPC drum
❖ Original scanning:
One-dimensional solid scanning system through CCD
❖ Copy process:
Dry electrostatic transfer system
❖ Development:
Dry two-component magnetic brush development system
❖ Fusing:
Heating roll pressure system
❖ Resolution:
600 dpi
❖ Exposure glass:
Stationary original exposure type
❖ Original reference position:
Rear left corner
❖ Warm-up time:
From the main power switch
Approximately 35 seconds (20 °C)
From the operation switch
10 seconds or less (20 °C)
❖ Originals:
Sheet/book/objects
❖ Maximum original size:
A4L, 8
1
/
2
" × 14"L
StellaC3_Intro_F-AE_FM_forPaper.book Page 47 Friday, August 25, 2006 1:43 PM