Appendix
50
3
Specifications for External Items
Following describes the items to be externally installed to the machine body.
Specification values represent the values when the copy function is used. Speci-
fication values may vary depending on the function used.
Exposure Glass Cover
Lower this over originals.
Auto Document Feeder capable of scanning both sides of a sheet
(ARDF)
❖ Mode:
•ADF mode
❖ Original size:
•Regular size:
One-sided originals: A4L - A5KL
One-sided originals: 8
1
/
2
" × 14"L - 5
1
/
2
" × 8
1
/
2
"KL
Two-sided originals: A4L - A5L
Two-sided originals: 8
1
/
2
" × 14"L - 5
1
/
2
" × 8
1
/
2
"L
•Custom size:
One-sided originals: 139 - 1260 mm (Horizontal)
Two-sided originals: 160 - 356 mm (Horizontal)
❖ Original weight:
• One-sided originals: 52 – 105 g/m
2
(14 – 28 lb.)
• Two-sided originals: 52 – 105 g/m
2
(14 – 28 lb.) (Duplex)*
* Originals that are 310 mm (13 in.) or longer in the feed direction should be
at least 64 g/m
2
(17 lb.).
❖ Number of originals to be set:
• 50 sheets (80 g/m
2
, 20 lb.)
❖ Maximum power consumption:
• Less than 50 W (Power is supplied from the main unit.)
❖ Dimensions (W × D × H):
• 485 × 360 × 120 mm, 19.1 × 14.2 × 4.8 inches
❖ Weight:
• 8 kg (17.7 lb.) or less
StellaC3_Intro_F-AE_FM_forPaper.book Page 50 Friday, August 25, 2006 1:43 PM
To Next Page
Loading...
Need help?
General
