4. Ventilation holes
Prevent overheating.
5.
Main power switch
If the machine does not operate after turning on the operation switch, check if the main power switch is turned
on. If it is off, turn it on. See “Turning On/Off the Power”.
6. Main power indicator
Lights when the main power switch is turned on, and goes off when the switch is turned off.
7. Operation switch
Press to turn the power on (the operation switch indicator lights up). To turn the power off, press again (the
operation switch indicator goes off). See “Turning On/Off the Power”.
8. Control panel
See “Control Panel”.
9. Internal tray
Copied/printed paper and fax messages are delivered here.
10. Front cover
Open to access the inside of the machine.
11. Paper tray
Load paper here.
12. Paper tray unit (Tray 2 and Tray 3)
See “External items”.
1. Right cover
Open this cover to remove jammed paper fed from the paper tray.
2.
Bypass tray
Use to copy or print onto OHP transparencies, adhesive labels, translucent paper, envelopes, and custom size
paper.
3. Lower right covers
Open these covers to remove jammed paper fed from the paper tray unit (Tray 2 and Tray 3).
2. Getting Started
36
To Next Page
Loading...
Need help?
General