• If multiple sheet feeding occurs, load sheets one by one.
• Flatten out curled sheets before loading them.
• To print on envelopes from the bypass tray: select [System Settings], [Tray Paper Settings], and then,
for the [Paper Type: Bypass Tray] setting, specify [Thick Paper].
• When copying or printing onto letterhead paper, the paper placing orientation is different depending
on which function you are using. See “Orientation-Fixed Paper or Two-Sided Paper”.
• If you load paper of the same size in two or more trays, the machine automatically shifts to another
tray when the first tray in use runs out of paper. This function is called Auto Tray Switching. (However,
if the paper type of one tray is recycled or special paper, the settings of the other trays must be the
same for the Auto Tray Switching function to work.) This saves interrupting a copy run to replenish
paper when making a large number of copies. You can set the paper type of the paper trays under
Paper Type: Tray 1 - 3. See “System Settings”, Network and System Settings Guide . For the setting
procedure of the Auto Tray Switching function, see “Copier Features”, Copy Reference .
• When copying or printing onto prepunched paper, the copy/print speed is slower than usual.
• The paper types you can select in [System Settings] are only general classifications. Copy quality for
every kind of paper in a classification is not guaranteed. See “Unusable Paper” for more information.
• p.59 "Orientation-Fixed Paper or Two-Sided Paper"
•
p.73 "Unusable Paper"
3. Adding Paper
70
To Next Page
Loading...
Need help?
General