3. Press [Immed. TX].
4. Place the original into the ADF.
5. Select the scan settings you require.
6. Specify a destination.
If you make a mistake, press the [Clear] key, and then enter again.
7. Press the [Start] key.
Sending Originals Using the Exposure Glass (Immediate Transmission)
1. Press [Immed. TX].
2. Place the first page face down on the exposure glass.
3. Specify a destination.
4. Make the scan settings you require.
5. Press the [Start] key.
6. Place the next original on the exposure glass within 10 seconds when you send multiple
originals, and then repeat Steps 4 and 5.
Repeat this step for each page.
4. Fax
114
To Next Page
Loading...
Need help?
General
