Banner Page
Do not use NetWare to configure banner page.
Follow the procedure below to disable banner page according to the operating system used:
• Clear the [Enable banner] check box on the [NetWare Settings] tab in the printer properties
dialog box.
When using the PostScript 3 Printer Driver
Follow the procedure below to set up the PostScript 3 printer driver.
1. On the [Start] menu, select [Printers and Faxes].
2. Right-click the printer's icon, and then click [Properties].
3.
Click the [Device Settings] tab.
4. Select [No] on the [Send CTRL-D Before Each Job:] and [Send CTRL-D After Each Job:], and
then click [Apply].
5. Click [OK].
Printing after Resetting the Printer
Printer to print server connection requires 30–40 seconds to resume after the printer is reset. During
this period, jobs may be accepted (depending on NetWare specifications) but not printed.
To print after resetting the printer as the remote printer, check on the print server that the remote
printer is disconnected, or wait for two minutes before trying to print.
2. Installing the Printer Driver
28
To Next Page
Loading...
Need help?
General
