Ricoh MP C305SPF User Manual

Special Tools
 Use only standard tools approved for machine maintenance.
 For special adjustments, use only the special tools and lubricants described in the service
manual. Using tools incorrectly, or using tools that could damage parts, could damage the
machine or cause injuries.
During Maintenance
General
 Before you begin a maintenance procedure: 1) Switch the machine off, 2) Disconnect the
power plug from the power source, 3) Allow the machine to cool for at least 10 minutes.
 Avoid touching the components inside the machine that are labeled as hot surfaces.
Safety Devices
 Never remove any safety device unless it requires replacement. Always replace safety
devices immediately.
 Never do any procedure that defeats the function of any safety device. Modification or
removal of a safety device (fuse, switch, etc.) could lead to a fire and personal injury.
Always test the operation of the machine to ensure that it is operating normally and safely
after removal and replacement of any safety device.
 For replacements use only the correct fuses or circuit breakers rated for use with the
machine. Using replacement devices not designed for use with the machine could lead to
a fire and personal injuries.

Ricoh MP C305SPF Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
ADF Capacity	50 sheets
Duplex Printing	Yes
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Functions	Print, Copy, Scan, Fax
Scanner Type	Flatbed, ADF
Fax Speed	33.6 Kbps
Print Speed	30 ppm
Paper Capacity	350 sheets
Paper Size	A4, A5, A6, B5
Fax Transmission Speed	Approximately 3 seconds per page
Operating System Compatibility	Windows, Mac, Linux