Ricoh MP C305SPF User Manual

HDD Option Type C305 (D656)
SM 2-57 D117/D118
Installation
8. The encryption key is printed.
2.9.4 DATA OVERWRITE SECURITY
1. Do the following procedure if a customer wants to use this function.
2. Do SP5-878-1(Option Setup - Data Overwrite Security) and touch [EXECUTE].
3. Go out of the SP mode, turn off the operation switch, then turn off the main power switch.
4. Turn the machine power on.
5. Press [User Tools] and select System Setting > Administrator Tools > Auto Erase Memory
Setting > On
6. Exit from User Tools mode.
7. Check the display and make sure that the overwrite erase icon [A] is displayed.
8. Make a Sample Copy.
9. Check the overwrite erase icon.
10. The icon [B] changes to [C] when job data is stored in the hard disk.
11. The icon goes back to its usual shape [B] after this function has completed a data overwrite
operation to the hard disk.
12. Do SP5990-005 (SP print mode - Diagnostic Report).
13. Look at the report:
14. Under "[ROM No./Firmware Version]" check the number and version number listed for "HDD
Format Option".
15. Under "[Loading Program]" check the option number and version number listed for
"GW_zoffy".
16. These two version numbers should be identical.
17. Exit SP mode.

Ricoh MP C305SPF Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
ADF Capacity	50 sheets
Duplex Printing	Yes
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Functions	Print, Copy, Scan, Fax
Scanner Type	Flatbed, ADF
Fax Speed	33.6 Kbps
Print Speed	30 ppm
Paper Capacity	350 sheets
Paper Size	A4, A5, A6, B5
Fax Transmission Speed	Approximately 3 seconds per page
Operating System Compatibility	Windows, Mac, Linux