Ricoh MP C4503 Series User Manual

Specifying the File Type
This section explains the procedure for specifying the file type of a file you want to send.
File types can be specified when sending files by e-mail or Scan to Folder, sending stored files by e-mail
or Scan to Folder, and saving files on a memory storage device.
You can select one of the following file types:
• Single Page: [TIFF / JPEG], [PDF]
If you select a single-page file type when scanning multiple originals, one file is created for each
single page and the number of files sent is the same as the number of pages scanned.
• Multi-page: [TIFF], [PDF]
If you select a multi-page file type when scan multiple originals, scanned pages are combined and
sent as a single file.
Selectable file types differ depending on the scan settings and other conditions. For details about
file types, see "Notes About and Limitations of File Types", Scan .
1. Press [Send File Type / Name].
2. Select a file type.
If necessary, configure [PDF File Setting].
3. Press [OK].
Specifying the File Type
121

Ricoh MP C4503 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Standard Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Monthly Duty Cycle	200, 000 pages
Print Technology	Laser
Fax Speed	33.6 Kbps
Print Speed	45 ppm
Paper Capacity	4, 700 sheets
Connectivity	USB, Ethernet, Wi-Fi
Scan Resolution	600 dpi
Memory	2 GB
Control Panel	9-inch color touchscreen
Operating System Compatibility	Windows, Mac, Linux