Ricoh MP C4503 Series User Manual

Loading Paper into Tray 3 (LCT)
(mainly Europe and Asia)
Tray 3 (LCT) can hold A4 paper only. If you want to print on 8
1
/
2
× 11 from Tray 3 (LCT), contact
your service representative.
(mainly North America)
Tray 3 (LCT) can hold 8
1
/
2
× 11 paper only. If you want to print on A4 from Tray 3 (LCT), contact
your service representative.
• When paper loaded in the right side of Tray 3 (LCT) runs out, paper on the left is automatically
shifted to the right. Do not pull out Tray 3 (LCT) while the tray is moving paper; wait until sounds
stop coming from the tray.
• For the right stack, align the right edge of the paper with the right edge of the tray. For the left
stack, align the left edge of the paper to the left edge of the tray.
1. Carefully pull out the paper tray until it stops.
CVA017
2. Square the paper and load it print side up.
Do not stack paper over the limit mark.
• Whole tray pulled out
CVA018
9. Adding Paper and Toner
138

Ricoh MP C4503 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Standard Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Monthly Duty Cycle	200, 000 pages
Print Technology	Laser
Fax Speed	33.6 Kbps
Print Speed	45 ppm
Paper Capacity	4, 700 sheets
Connectivity	USB, Ethernet, Wi-Fi
Scan Resolution	600 dpi
Memory	2 GB
Control Panel	9-inch color touchscreen
Operating System Compatibility	Windows, Mac, Linux